Color Group: White
Width: 110” (Mykonos)
Material: 100% Polyester
- NFPA 701 TM#1 (Small Scale)
13.92 oz / sq yds (472.97 g / sq m)
0.030 in (0.76 mm)
Fabric should be regularly dusted/vacuumed as appropriate. If commercial spot cleaners are used, they must first be tested and allowed to dry on a inconspicuous area to ensure compatibility.
- Flame Resistant
- 100% Opaque Blackout
- UV Resistant
- Insulation Energy Saving
- NRC (Noise Reduction Coefficient)
SAA (Sound Absorption Average) tested in accordance with ASTM-C423-09a
- PVC Free / Lead Free
You May Also Like...
“W”—Code W stands for ‘Water based cleaner’ and these are the easiest fabrics to clean. This is not the same as being machine washable. This code means that you can spot clean your fabric with a water-based shampoo or foam upholstery cleaner. You can use a brush to agitate the cleaner or even an upholstery attachment on a carpet cleaner. Be careful to avoid over-wetting the stain.
“S”—Fabrics that are Code S must be cleaned with solvents (dry clean only). You can spot treat stains with a water-free solvent or dry-cleaning product. Use solvent cleaners in a well-ventilated room and keep away from open flames.
“W/S”—A W/S code, as you might expect, means that a combination of dry cleaning solvents and water-based cleaners may be used. These fabrics can be spot cleaned with upholstery shampoo, foam from a mild detergent, or a mild dry cleaning solvent. This is a case where the pre-test is especially important.
“X”—If you have fabrics with Code X, they can only be cleaned by vacuuming or light brushing. A Code X means the fabric is not cleanable with water or solvent cleaners.